Remixed Sample Tag from 3341363

I took the original "swatch" (sample) from Thing:3341363 and threw it into Fusion 360 to remodel it, and added the numerical thicknesses to the cutout area.

I recommend printing this at 0.1mm layer height, so that the first cutout (0.2mm) has two layers to it, but maximum layer height should be 0.2mm, as the cutouts step at 0.2mm increments.

I also recommend that the original boxes be increased to 102% (Width) and 106% (Length) because I found the samples had issues sliding in and out (that could be because of my 0.6mmm nozzle I used for the PETG with which I made them)

BTW, the original poster never said, but the labels to use for these are AVERY 8167 or equivalent.