Thingiverse
Remote High Temperature Bed Level Probe
von phessellund
1
Downloads
0
Likes
0
Makes
This is the external (Outside heated chamber) part of a high temperature bed level probe. The probe has an inside part that is not available. The inside part has a retractable pin and a mechanical contact. The servo mounted outside retracts and extends the pin inside the heated chamber by pulling on a steel wire inside a spring guide. The probe can handle up to 180C chamber temperatures. The Complete probe can be purchased here:
https://hightemp3d.com/products/remoteht-bed-level-probe-3d-printer?_pos=1&_sid=ef5810979&_ss=r
Printing:
0.2 mm layer height. Only suports for the outer wheel. You may have to scale either the inner wheel or the outer wheel to make them interlock well.
https://hightemp3d.com/products/remoteht-bed-level-probe-3d-printer?_pos=1&_sid=ef5810979&_ss=r
Printing:
0.2 mm layer height. Only suports for the outer wheel. You may have to scale either the inner wheel or the outer wheel to make them interlock well.
Hast du dieses Modell gedruckt? Einloggen und dein Make teilen!
Melde dich an, um einen Kommentar zu hinterlassen
AnmeldenNoch keine Kommentare – sei der Erste!
