Thingiverse
Removable Glass HBP for Replicator 1
by andrewchoy
12
Downloads
3
Likes
0
Makes
Budget glass build surface upgrade for Replicator 1 and clones. You can find a 8"x10" glass plate at basically any hardware store like Home Depot for around 2 dollars.
Glass mounts right above the heated bed and is removable. The glass plate slides into the back mounting points and is secured by locking pins on both front mounts. The mounts are secured to the corners of the HBP with the pre-existing, stock screws.
You will need:
8'x10' glass plate
2 M4 30mm screws
2 M4 Wing Nuts
3mm Z end stop (Recommended) thing:2767970
The black tape in my pictures is vibration damping padding.
Glass mounts right above the heated bed and is removable. The glass plate slides into the back mounting points and is secured by locking pins on both front mounts. The mounts are secured to the corners of the HBP with the pre-existing, stock screws.
You will need:
8'x10' glass plate
2 M4 30mm screws
2 M4 Wing Nuts
3mm Z end stop (Recommended) thing:2767970
The black tape in my pictures is vibration damping padding.
Did you print this model? Sign in and share your make!
Sign in to leave a comment
Sign inNo comments yet – be the first!