Removable Left Side Window for QIDI Printer

This is a set of parts for a QIDI Tech 1 Printer. They essentially hold the side window in place so that it can be quickly removed for better access to the print bed. I believe that it would also work for equivalent MakerBot printers, but that's not verified. Feel free to modify it to suite your needs on other printers.

You need to print:

1. support-side_window-qidi_printer.stl: 2 each
2. latch-side_window-qidi_printer.stl: 1 each

The parts mount using the existing screws and nuts that hold the side window, so no additional parts are required. The Magnetic Latch mounts on the top of the Window in the center as shown in the photo. You will need to drill two 3/16” diameter holes in the Window for the screws. You need to super-glue a 1/4” diameter x 1/16” thick Neodymium magnetic into the pocket of the Latch so that the window stays in place.

The Supports mount on the inside of the printer as shown in the photo. Drill a 3/16” diameter hole in the left side wall of the Print