Renegade Spectrum HueForge

by Atrus Design · Hueforge & Lithophane

10 Downloads

11 Likes

5 Makes

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 180x135mm in sizeYou may print at higher layer heights below the Min Depth of 0.48mmThe Max Depth is 1.8mm and the Actual Depth is 1.8mm Filaments Used: PLA SmartFill Black Transmission Distance: 0.4 PLA SmartFill Blue Transmission Distance: 1.8 PLA SmartFill Yellow Transmission Distance: 5.8 PLA SmartFill White Transmission Distance: 6This print uses 4 unique filaments Swap Instructions: Start with Black At layer #10 (0.88mm) swap to Blue At layer #12 (1.04mm) swap to Yellow At layer #20 (1.68mm) swap to White for the rest.