Thingiverse
Repeating mini crossbow
von DIYPark
29.7k
Downloads
25.6k
Likes
303
Makes
Things download - https://cults3d.com/en/3d-model/game/repeating-mini-crossbow
How to make - https://youtu.be/N4zxyb1klb0
- Some people complained that the hole was small. So I modified the hole size of some parts from 1.98mm to 2.2mm. The old one was compressed separately.
- This model is optimized for 0.4mm nozzle.
- It would be cumbersome, but please print out the parts one by one.
- You must wear safety goggles for safety.
- The total print time depends on the slicer program setting, but it usually takes 2 to 3 hours.
- The consumption of filament is about 8m. PLA, and ABS filaments may be used.
How to make - https://youtu.be/N4zxyb1klb0
- Some people complained that the hole was small. So I modified the hole size of some parts from 1.98mm to 2.2mm. The old one was compressed separately.
- This model is optimized for 0.4mm nozzle.
- It would be cumbersome, but please print out the parts one by one.
- You must wear safety goggles for safety.
- The total print time depends on the slicer program setting, but it usually takes 2 to 3 hours.
- The consumption of filament is about 8m. PLA, and ABS filaments may be used.
Hast du dieses Modell gedruckt? Einloggen und dein Make teilen!
Melde dich an, um einen Kommentar zu hinterlassen
AnmeldenNoch keine Kommentare – sei der Erste!
