Thingiverse
Replacement Clip for FiiO µBTR
di shawly
2
Download
6
Likes
0
Makes
The plastic hinges on my FiiO µBTR bluetooth receiver broke, so I made a replacement.
You still need the original spring and the small metal bolt.
If you lost the bolt you might source a 1mm bolt from something else but I don't think you'll have much luck if you lost the spring as well.
Print time is around 21m with my MK3s with a 0.1mm layer height. You should stick to 0.1mm or lower, 0.2mm could work but I didn't try since I wanted to get the hinges as smooth as possible.
I moved to printables, so you can get the model there: https://www.printables.com/model/342727-replacement-clip-for-fiio-ubtr
You still need the original spring and the small metal bolt.
If you lost the bolt you might source a 1mm bolt from something else but I don't think you'll have much luck if you lost the spring as well.
Print time is around 21m with my MK3s with a 0.1mm layer height. You should stick to 0.1mm or lower, 0.2mm could work but I didn't try since I wanted to get the hinges as smooth as possible.
I moved to printables, so you can get the model there: https://www.printables.com/model/342727-replacement-clip-for-fiio-ubtr
shawly pubblica anche su
9 modelli aggiuntivi su altre 1 piattaforme
Hai stampato questo modello? Accedi e condividi il tuo make!
Accedi per lasciare un commento
AccediAncora nessun commento – sii il primo!
