Replacement Gear for Chainsaws

UPDATE: Added more support to the ceiling wall of the gear for added strength. (PETG) test trial failed at this point connected to the teeth. Steel sprocket survived initial test! Recommend using Nylon or at the very least ABS.ADDED: Sprocket press piece, This piece can be used when pressing in the steel sprocket to prevent the walls surrounding the sprocket from "blow out" when heating and pressing into the gear.NOTE: This is a prototype and is under constant revision and improvement. The part listed is Version 4. This replacement gear is designed specifically for DIY repairs or custom modifications. Whether your original gear is worn out or damaged, this 3D printable gear offers an affordable and reliable solution to get your chainsaw working again.Key Features:Customizable: Feel free to modify the file to fit your needs or experiment with different materials for improved durability.Assembly Instructions: This part requires some modification of your original gear:Remove the Steel Sprocket: Carefully remove the steel sprocket from the original, mold-injected plastic gear.This sprocket is essential for the gear's functionality, as it meshes with the chainsaw's chain.Install the Sprocket into the 3D Printed Gear: Heat up the steel sprocket and press it into the 3D printed gear.You may need to use a heat source (e.g., a heat gun) to heat the metal enough to allow the sprocket to fit into place.Secure the Sprocket: Once the sprocket is inserted, apply a strong adhesive or epoxy to ensure it stays securely in place. This will provide added stability and prevent the sprocket from loosening during use.Fit the Gear: After the adhesive has dried and the sprocket is securely in place, reassemble the gear into your chainsaw, following the manufacturer's instructions.Print Settings:Material: Nylon or maybe ABS (for increased durability)Infill: 50-100% for strengthCompatibility: This gear is designed for Worx chainsaw models, but be sure to verify the compatibility with your sp