Reptil Eye

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 143.47x200mm in size You may print at higher layer heights below the Min Depth of 0.48mm The Max Depth is 3.1mm and the Actual Depth is 2.6mm Filaments Used:     PLA Jayo Black Transmission Distance: 0.6     PLA Kingroon Grey Transmission Distance: 2     PLA Kingroon Green Transmission Distance: 1.8     PLA Smartmaterials White Transmission Distance: 5 This print uses 4 unique filaments Swap Instructions:     Start with Black     At layer #9 (0.8mm) swap to Gray     At layer #11 (0.96mm) swap to Green     At layer #13 (1.12mm) swap to White for the rest.