Reptil Eye

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 143.47x200mm in sizeYou may print at higher layer heights below the Min Depth of 0.48mmThe Max Depth is 3.1mm and the Actual Depth is 2.6mmFilaments Used: PLA Jayo Black Transmission Distance: 0.6 PLA Kingroon Grey Transmission Distance: 2 PLA Kingroon Green Transmission Distance: 1.8 PLA Smartmaterials White Transmission Distance: 5This print uses 4 unique filamentsSwap Instructions: Start with Black At layer #9 (0.8mm) swap to Gray At layer #11 (0.96mm) swap to Green At layer #13 (1.12mm) swap to White for the rest.