Resin Mixer

my third iteration of a mixer optimized for very viscous fluids like resin. Made to fit and lock into a standard ¼" drill.

Print Settings I used for test samples:
5 Walls
4 Top
4 Bottom
50 % infill
.12mm Layer height
60mm/s speed
(sliced with Cura)

Print tested on Artillery Sidewinder X1. No support necessary, but I recommend using a brim to improve bed adhesion.
Not yet tested in actual resin, I preformed all of my testing in a cornstarch/water mixture made to match a viscosity normal for Acrylic Resin.