Thingiverse

Resistor holder

by MagnoCube

7 Downloads

13 Likes

0 Makes

40 small (20*20mm) containers in a 45 degree angle.
the containers are 42mm deep (leaving around 8 mm of resistor legs sticking out)

NOTE: If your printer can print 45 degree angles you do not have to enable support.
I do not recommend printing this Thing with support on!

Printing time (0.3 mm layer height with CR-10s printer): 9.5 hours.

sorry for the bad quality photo's. my flash was on.
Please share a photo if you made one!

box electronic hobby resistor resistor box sorting sotring storage tray box electronic hobby resistor resistor box sorting sotring storage tray

Source

Thingiverse

What you need to print this: Intermediate

Why?

supports needed · 0.30mm layers

Single piece Supports required

Supports 2/3

Assembly 0/3

Settings 1/3

Bed size 0/3

Post-process 0/3

Printer

FDM / FFF

File format

STL

Material

Min. bed size

20 mm (Small)

Layer height

0.3 mm

Est. print time

9.5 h

Software

Cura, PrusaSlicer, or similar

Frequently Asked Questions

Which 3D printer is suitable for Resistor holder?

Any FDM printer should handle Resistor holder just fine. It's been printed on machines like Bambu Lab A1 Mini, Prusa Mini+, Creality Ender 3, most FDM printers. A minimum build volume of 20 mm is recommended.

Does Resistor holder need supports when printing?

Yes, Resistor holder will probably need supports for the overhangs. Tree supports work well here and are easier to remove than regular ones.

How long does it take to print Resistor holder?

According to the design notes, Resistor holder takes approximately 9.5 hours to print at standard settings (0.2 mm layer height, 15% infill). Actual print time varies based on your printer speed, layer height, and infill density.

Is Resistor holder beginner-friendly?

Resistor holder is a mid-level print. A bit of experience helps, but it's nothing a careful beginner can't tackle with standard slicer settings.

What file format is Resistor holder available in?

Resistor holder is available in STL format. These files can be opened and sliced using free software such as Cura, PrusaSlicer, Bambu Studio, or OrcaSlicer for FDM printing, or ChiTuBox and Lychee Slicer for resin printing. The download is provided through Thingiverse.

Is Resistor holder free to download?

Yes, Resistor holder is available as a free download through Thingiverse. Always check the license on the original platform to understand commercial use, remixing, and attribution requirements.

No ratings yet

No comments yet – be the first!

Similar Models

6 Suggestions

Resistor holder

Similar Models

Add to Collection