Retro Style Mini-ITX PC Case

FeaturesSupport Mini-ITX motherboardSupport ATX size PSUSupport air cooler up to 50mm Support one 3.5 inch front bay for front I/O, or a floppy drive if you like :)No extra fan needed. All air flow is contributed by the CPU cooler and the PSU fan.Does not support discrete GPUThere is no dedicated 2.5 disk slot, but I left plenty space above the PSU, where SATA SSD can be tapedTools and Material you will needAbout 1kg of filament39 M3×4mm insert (get the kit that comes with a heat pressing tool)33 M3×8mm screw8 M3×12mm screw4 #6-32 UNC screw for PSU mounting2 keyboard switches for Power and Reset2 5mm through hole LEDs and 2 4.7K ohm resistorsSome wire and female jumper cableA soldering iron to heat press the M3 inserts and connect wiresA 3.5 inch front I/O moduleSuper glueA detailed instruction is in the files.