Reverse Z Brace for Duplicator I3 Plus

Used and loved the Z Brace by spool3d_canada, but found that once I started using an enclosure the Z Braces began to get in the way. Following the lead of FilamentCorner's z Brace and z Extensions (Z-Kit) http://www.thingiverse.com/thing:2012743, I decided to make a hybrid design that moved the braces to the back of the printer so as to be out of the way.

All of this is based on AzzA's original work which can be found here http://www.thingiverse.com/thing:1444979.

The major differences of my design are the modifications to the single screw holes on the feet for the Duplicator I3 Plus. I also extended the feet design to project out farther to the sides so that I could utilize the tower side mounts made by FilamentCorner. Finally I added a space to mount an SD card extension cable on the front right foot of the printer so that I didn't have to fumble loading the SD card on the side of the printer.

Parts other than 3d printed:
* 3/8 threaded rod - (2) 18" pieces
* (4) 3/8 nut