Revisited Hellraiser Torment puzzle box

The box is composed of 2 main parts (First Half and Second Half), while the internal mechanism works thanks to a double pipe system with a terminal thread that allows the two main parts to connect and rotate. I separated the second half male thread (that has to be glued to the second half) so that you can print it at 0.1mm resolution. There also is a closing cap, that has to be glued on top of First half.
The decorative external patterns are supposed to be printed with a 0.2mm nozzle, but you can print them with a 0.4mm as well.
So, a little recap:
-Print First and Second Half at 0.2mm resolution or more.
-Print the threaded pipe and the male thread at 0.1mm resolution.
-Print the other smooth pipe and the closing cap at 0.2mm resolution.
-Print the decorative patterns (named by face) preferably with a 0.2mm nozzle.
-Glue the male thread to the second half in the square cavity.
-Insert the smooth pipe and the threaded pipe into Firts half ( has shown in the explicative image a