RF Remote Transmitter Housing

One of my customers asked for a remote start option for one of their pallet wrappers. I have these rf remotes that I buy on Ebay for less than 10 dollars each, but I didn’t want my customer to know my price on these because I am charging substantially more than 10 dollars each. So I designed this little housing for an rf transmitter. Plus, with my housing, I can mount it on a forklift and it looks a little more industrial.
Of course you can choose any color combination that you like. I chose red and yellow for high visibility.
Pop the transmitter case open from the side with the keychain ring using a single edge razor blade. After it is open a little bit you can stick a small flat screwdriver in there to pry it open the rest of the way. Take out the circuit board and silicone mask.
Place the housing upside down on a flat surface. Press the circuit board into the silicone mask then start the mask on a slight angle starting with the LED through the hole. Pick it up, wiggle it aroun