RGB LED moodlight

I made about 50 RGB LED moodlights to put on the guest-tables during a party.
https://youtu.be/pUrx05n4kDU
Every moodlight does have a neopixel ring with 16 RGB LEDs (for the top) and 24 RGB LEDs (for the bottom)
You can control it with an arduino and the neopixel library, but I use an ESP8266 (ESP-01) module in every mood light, together with a lipo battery pack. (the bottom hole is just big enough to house a 25000 mAH battery pack, making the lights run all night :-)

BUILDING IT:
- all parts can be printed without support or rafts. (the bottom piece does have it's own support, you can break it out after printing)
- print the upper part as a "spiral" (or in some software, also called "vase"), so you get
a nice thin light-hood. Install upper- and lower LED ring first, and make wire connections.
(there are wholes to put the wires from bottom to top, and into the middle of the under piece of the light)
- glue together the parts with a few drops of superglue.
- install hardwar