Slicer Discord
Rhasspy Case - RPi0 + ReSpeaker2 – 3D-Druckmodell von Thingiverse Thingiverse
Rhasspy Case - RPi0 + ReSpeaker2 – Bild 1 Rhasspy Case - RPi0 + ReSpeaker2 – Bild 2 Rhasspy Case - RPi0 + ReSpeaker2 – Bild 3 Rhasspy Case - RPi0 + ReSpeaker2 – Bild 4 Rhasspy Case - RPi0 + ReSpeaker2 – Bild 5 Rhasspy Case - RPi0 + ReSpeaker2 – Bild 6

Rhasspy Case - RPi0 + ReSpeaker2

78 Downloads
75 Likes
2 Makes
Zum Modell
This is a case for a Raspberry Zero which is equipped with a [ReSpeaker2 Hat](https://wiki.seeedstudio.com/ReSpeaker_2_Mics_Pi_HAT/) and a loudspeaker.
This device acts as a [Rhasspy](https://rhasspy.readthedocs.io) satellite.

The lid is covered with speaker fabric and has a button that presses the on the ReSpeaker2.
Due to the recesses on the back it is possible to connect a USB dongle and an external loudspeaker in addition to the power cable.

The following speakers are provided:
[Large](https://www.amazon.de/gp/product/B0822Z4LPH/ref=ppx_yo_dt_b_asin_title_o07_s00?ie=UTF8&psc=1) Hole spacing 63x24mm - Case_L
[Small](https://www.amazon.de/gp/product/B07GH1ZNDQ/ref=ppx_yo_dt_b_asin_title_o03_s00?ie=UTF8&psc=1) Hole spacing 36mm - Case_S

Deutsche Version:
Hierbei handelt es sich um ein Gehäuse für einen Raspberry Zero welcher mit einem [ReSpeaker2 Hat](https://wiki.seeedstudio.com/ReSpeaker_2_Mics_Pi_HAT/) und einem Lautsprecher ausgestattet ist.
Dieses Gerät dient als [
Quelle
Thingiverse
Was du zum Drucken brauchst: Anfänger Niedrige Konfidenz
Einteilig
Supports 1/3
Zusammenbau 0/3
Einstellungen 1/3
Druckbett 0/3
Nachbearbeitung 0/3
Drucker
FDM / FFF
Dateiformat
STL
Material
Mindest-Druckbett
63 mm (Klein)
Software
Cura, PrusaSlicer o. Ä.
Noch keine Bewertungen
Noch keine Kommentare – sei der Erste!
Feed Blog Slicer Kostenrechner Bildersuche Einreichen Kontakt Discord ☕ Buy me a coffee
DE EN FR ES IT NL

Zur Sammlung hinzufügen