Thingiverse

Ribbon Candy

by NAK3DDesigns

38 Downloads

47 Likes

0 Makes

Here are two versions of my design to print Ribbon candy (not for consumption)...

This is designed to be printed in Vase Mode with zero top/bottom layers and then cut into two seperate pieces.

Samples were printed with Polyalchemy filaments in vase mode with a 1.2mm nozzle and .4 layer height at 25mm/sec, but I'm sure could be printed at any size.

I did leave some space between ribbons for ease of printing. The space can easily be closed by heating with a hair drier.

Source

Thingiverse

What you need to print this: Intermediate Medium confidence

Why?

no supports · large print

Support-free Single piece

Supports 0/3

Assembly 0/3

Settings 1/3

Bed size 2/3

Post-process 0/3

Printer

FDM / FFF

File format

STL

Material

Min. bed size

200 mm (Large)

Software

Cura, PrusaSlicer, or similar

Frequently Asked Questions

Which 3D printer is suitable for Ribbon Candy?

Any FDM printer should handle Ribbon Candy just fine. It's been printed on machines like Bambu Lab A1, Prusa MK4, Creality Ender 3, Anycubic Kobra. A minimum build volume of 200 mm is recommended.

Does Ribbon Candy need supports when printing?

No supports needed for Ribbon Candy — it's designed to print clean off the bed.

What file format is Ribbon Candy available in?

Ribbon Candy is available in STL format. These files can be opened and sliced using free software such as Cura, PrusaSlicer, Bambu Studio, or OrcaSlicer for FDM printing, or ChiTuBox and Lychee Slicer for resin printing. The download is provided through Thingiverse.

Is Ribbon Candy free to download?

Yes, Ribbon Candy is available as a free download through Thingiverse. Always check the license on the original platform to understand commercial use, remixing, and attribution requirements.

No ratings yet

No comments yet – be the first!

Similar Models

6 Suggestions

Ribbon Candy

Similar Models

Add to Collection