Thingiverse
Ring Indoor Camera Window Mount (Re-Post)
von TinkerWest
50
Downloads
38
Likes
0
Makes
This is a re-posting since the first post had a indexing problem.
This is a Ring Indoor Camera Window Mount. There are three versions. Which version you use will depend on how much room light there is. Medium should work for most rooms. Print in black to prevent reflections. I recommend a clear UV-Resistant attachment.
You will need to TURN OFF the "Infrared Lights for Night Vision" setting under the Video Settings otherwise the reflection will blind the camera.
To assemble remove bottom stand from the ring camera and then slide in from the top down. I used 4 Command Outdoor Clear Medium Strips to attach as follows:
Command Outdoor Clear Refill Strips, Re-Hang Outdoor Window Hooks (17615CLRAW-ES)
Note this will only fit the Ring Indoor Camera and Not the Ring Stick Up Camera.
This is a Ring Indoor Camera Window Mount. There are three versions. Which version you use will depend on how much room light there is. Medium should work for most rooms. Print in black to prevent reflections. I recommend a clear UV-Resistant attachment.
You will need to TURN OFF the "Infrared Lights for Night Vision" setting under the Video Settings otherwise the reflection will blind the camera.
To assemble remove bottom stand from the ring camera and then slide in from the top down. I used 4 Command Outdoor Clear Medium Strips to attach as follows:
Command Outdoor Clear Refill Strips, Re-Hang Outdoor Window Hooks (17615CLRAW-ES)
Note this will only fit the Ring Indoor Camera and Not the Ring Stick Up Camera.
Hast du dieses Modell gedruckt? Einloggen und dein Make teilen!
Melde dich an, um einen Kommentar zu hinterlassen
AnmeldenNoch keine Kommentare – sei der Erste!
