Thingiverse
Ring Indoor Camera Window Mount
par TinkerWest
73
Téléchargements
59
Likes
0
Makes
This is a Ring Indoor Camera Window Mount. There are three versions. Which version you use will depend on how much room light there is. Medium should work for most rooms. Print in black to prevent reflections. I recommend a clear UV-Resistant attachment.
You will need to TURN OFF the "Infrared Lights for Night Vision" setting under the Video Settings otherwise the reflection will blind the camera.
To assemble remove bottom stand from the ring camera and then slide in from the top down. I used 4 Command Outdoor Clear Medium Strips to attach as follows:
Command Outdoor Clear Refill Strips, Re-Hang Outdoor Window Hooks (17615CLRAW-ES)
Note this will only fit the Ring Indoor Camera and Not the Ring Stick Up Camera.
You will need to TURN OFF the "Infrared Lights for Night Vision" setting under the Video Settings otherwise the reflection will blind the camera.
To assemble remove bottom stand from the ring camera and then slide in from the top down. I used 4 Command Outdoor Clear Medium Strips to attach as follows:
Command Outdoor Clear Refill Strips, Re-Hang Outdoor Window Hooks (17615CLRAW-ES)
Note this will only fit the Ring Indoor Camera and Not the Ring Stick Up Camera.
Vous avez imprimé ce modèle ? Connectez-vous et partagez votre make !
Connectez-vous pour laisser un commentaire
Se connecterPas encore de commentaires – soyez le premier !