Thingiverse

Ring Stack Toy

by Leadmagnet69

3 Downloads

4 Likes

1 Makes

Ring 1 - 135mm dia by 30mm tall - Print time - TPU 14hours
Ring 2 - 125mm dia by 30mm tall - Print time - TPU 11hours
Ring 3 - 115mm dia by 25mm tall - Print time - TPU 8hours
Ring 4 - 95m dia by 20mm tall - Print time - TPU 6hours
Ring 5 - 85mm dia by 20mm tall - Print time - TPU 5hours
Ring 6 - 75mm (4 rings - 75mm/65mm/55mm/45mm) dia by 20mm tall - Print time - TPU 4hours
Platter Base - 135mm dia by 180 tall (fully assembled) - Print time - TPU 2hours
Platter Rod - 27mm dia by 140mm tall - Print time - TPU 2hours
Rod Cap - 27mm dia by 30mm tall - Print time - TPU 1hour

In the photo's the pink (Ring 1) and white (Ring 2) are standard TPU filament. Printed with HEX fill at 15% density.

The green, red and blue rings (rings 3, 4 & 5) printed in translucent TPU filament HEX/TRIANGLE fill at 10%.

The small pink ring (Ring 6) is 4 rings together. Starting at 75mm and dropping 10mm for each ring. I could have printed them seperately, but I was concerned about size to small

Source

Thingiverse

What you need to print this: Beginner Medium confidence

Single piece

Supports 1/3

Assembly 0/3

Settings 1/3

Bed size 0/3

Post-process 0/3

Printer

FDM / FFF

File format

STL

Material

PLA, TPU

Min. bed size

50 mm (Small)

Est. print time

14 h

Software

Cura, PrusaSlicer, or similar

Frequently Asked Questions

Which 3D printer is suitable for Ring Stack Toy?

Any FDM printer should handle Ring Stack Toy just fine. It's been printed on machines like Bambu Lab A1 Mini, Prusa Mini+, Creality Ender 3, most FDM printers. A minimum build volume of 50 mm is recommended.

How long does it take to print Ring Stack Toy?

According to the design notes, Ring Stack Toy takes approximately 14 hours to print at standard settings (0.2 mm layer height, 15% infill). Actual print time varies based on your printer speed, layer height, and infill density.

What file format is Ring Stack Toy available in?

Ring Stack Toy is available in STL format. These files can be opened and sliced using free software such as Cura, PrusaSlicer, Bambu Studio, or OrcaSlicer for FDM printing, or ChiTuBox and Lychee Slicer for resin printing. The download is provided through Thingiverse.

Is Ring Stack Toy free to download?

Yes, Ring Stack Toy is available as a free download through Thingiverse. Always check the license on the original platform to understand commercial use, remixing, and attribution requirements.

No ratings yet

No comments yet – be the first!

Ring Stack Toy

Add to Collection