Thingiverse
Ring2: Corner Mount Bracket
di DocDrill
4
Download
3
Likes
0
Makes
My front porch didn't have a good location for a flush mount. Although Ring apparently has some options for a 15degree mount, I neither had it nor thought that angle would be sufficient. This is a true 45degree mount.
Designed to print without supports.
Hardware - (OPTIONAL - See Below):
- (4) M3x12mm Hex Head
- (4) M3 Nuts
Amazon Affiliate Link: https://www.amazon.com/gp/product/B06XQLTLHP/ref=as_li_ss_tl?ie=UTF8&psc=1&linkCode=sl1&tag=barongrutterd-20&linkId=6ae81478a51f754735671e309fafdb96&language=en_US
I think anyone printing should have a kit like this kit.
IF YOU WANT TO SKIP THE HARDWARE, I'm including a design (SelfThread) that will HOPEFULLY allow you to use the included Hex bolts to thread into the print. It's not a threaded design, but the print should be threadable. I HAVE NOT test printed this. Let me know if it's wrong, and I can update. Truth is, depending on how well tuned your printer is, the hole is likely to be a tough tighter. The thread diamete
Designed to print without supports.
Hardware - (OPTIONAL - See Below):
- (4) M3x12mm Hex Head
- (4) M3 Nuts
Amazon Affiliate Link: https://www.amazon.com/gp/product/B06XQLTLHP/ref=as_li_ss_tl?ie=UTF8&psc=1&linkCode=sl1&tag=barongrutterd-20&linkId=6ae81478a51f754735671e309fafdb96&language=en_US
I think anyone printing should have a kit like this kit.
IF YOU WANT TO SKIP THE HARDWARE, I'm including a design (SelfThread) that will HOPEFULLY allow you to use the included Hex bolts to thread into the print. It's not a threaded design, but the print should be threadable. I HAVE NOT test printed this. Let me know if it's wrong, and I can update. Truth is, depending on how well tuned your printer is, the hole is likely to be a tough tighter. The thread diamete
Hai stampato questo modello? Accedi e condividi il tuo make!
Accedi per lasciare un commento
AccediAncora nessun commento – sii il primo!
