RIP Racing drone frame

Spaceone no longer exists, and I'm low on frames. Started with more or less a similar stretch X configuration to the frame I was using. This frame is compatible with the other [pod designs](https://www.thingiverse.com/thing:2956487) on my page. Full drone build details can be found on [Rotorbuilds](https://rotorbuilds.com/build/12562)

Without the outriggers the arms oscilate and the PID controller loses its mind. they stabilized it enough where it flies stable now.

This is not designed to handle many crashes, but is designed to be very fast. new pilots be ware (the camera mount does not allow for very low camera angles either).

I have printed/assembled/flown the 'spar light' frame, and I beefed up the center plate slightly for the 'spar robust' design. battery strap goes under 4-1 ESC/FC stack. the bumps on the spar light are to help the battery clear the bolt heads.

all bolt holes are 6mm (with countersinks) so motor bolts should be 7.5-8mm long.