Riser pad with a loop key

Riser pad with an XT90-S based anti-spark mechanical switch (loop key) for esk8 application. The switch is made such that the loop key cannot be removed. Push to turn on. Pull to turn off.

All the parts are made press-fit. No glue required.

Two M3X6 bolts and two M3 nuts are needed.

I printed mine from PETG with:
- 0.4mm nozzle
- 0.2mm layer height
- 6 perimeters
- 15% infill

Videos showing it in action:
https://youtu.be/usg3-SHE_WY
https://youtu.be/5ZSmb4NRkAY