Rival Zeus Barrels

These are two barrel replacements that I made for the Nerf Rival Zeus line. I wanted to be able to add a grip to the front of the blaster and that meant that I needed some kind of tactical rail on the front.

This mod is a DROP IN mod. The part does fit tightly into the stock mounting points, which does mean that you must open the blaster and remove the original barrel.

*PRINTING ORIENTATION*
Please print these standing on either end with support. Due to the way that the mounting points inside of the blaster are setup, the print requires support.

*HANDLE*
This prints in two halves that should be printed flat. The two halves should be loosely tightened together then placed onto the rail that is attached to the barrel. Once in place, tighten down the screws to create a tight hold on the rail. These two parts should be attached to the barrel AFTER the new barrel is in place.

The following hardware is needed for printing the handles. You do not have to use McMaster Carr but it