Ro-Flash NO AMS – 3D printable model from MakerWorld

MakerWorld

Characters

Ro-Flash NO AMS

by Aura3D_Studio · Characters

264 Downloads

441 Likes

114 Makes

Go to Model

⚡ ROAD RUNNER X THE FLASH: SPEEDSTER MASHUP (NO-AMS)The fastest bird in the desert meets the fastest man alive! This 29 cm (11.4 inch) masterpiece is precision-engineered for a professional multi-color finish without an AMS, featuring a modular design to minimize print failure and support waste.Split Parts (to Reduced Support & Risk): The Tail, Hair, Mouth, Pants, and TorsoTail Optimization: Splitting the tail is critical to reduce height-related wobble and support complexity during printing. Print Time: Total combined print time is approximately 8 to 9 hours, depending on your specific printer and settings. Part GroupRecommended Filament ColorMain Body / Suit<td style="backg

flash Flash roadrunner theflash Speedster speed mashup NOAMS noams multipart statue MakerWorld makerworld BAMBULAB BamBulab looneytunes dccomics dc comics easyassembly

Category

Characters

Source

MakerWorld

Published

15.02.2026

Updated

12.05.2026

What you need to print this: Advanced

Why?

supports needed · 2 colors · large print

Supports required 2 colors / AMS

Supports 2/3

Assembly 2/3

Settings 1/3

Bed size 2/3

Post-process 1/3

Printer

FDM / FFF

File format

STL

Material

Min. bed size

200 mm (Large)

Colors

2 (AMS/MMU recommended)

Est. print time

9 h

Post-processing

Gluing

Software

Cura, PrusaSlicer, or similar

Frequently Asked Questions

Which 3D printer is suitable for Ro-Flash NO AMS?

Any FDM printer should handle Ro-Flash NO AMS just fine. It's been printed on machines like Bambu Lab A1, Prusa MK4, Creality Ender 3, Anycubic Kobra. A minimum build volume of 200 mm is recommended.

Does Ro-Flash NO AMS need supports when printing?

Yes, Ro-Flash NO AMS will probably need supports for the overhangs. Tree supports work well here and are easier to remove than regular ones.

How long does it take to print Ro-Flash NO AMS?

According to the design notes, Ro-Flash NO AMS takes approximately 9 hours to print at standard settings (0.2 mm layer height, 15% infill). Actual print time varies based on your printer speed, layer height, and infill density.

Is Ro-Flash NO AMS beginner-friendly?

Ro-Flash NO AMS is on the trickier side — supports are needed, multi-color printing (2 colors) is recommended. Worth getting a few simpler prints under your belt first if you're still learning.

What file format is Ro-Flash NO AMS available in?

Ro-Flash NO AMS is available in STL format. These files can be opened and sliced using free software such as Cura, PrusaSlicer, Bambu Studio, or OrcaSlicer for FDM printing, or ChiTuBox and Lychee Slicer for resin printing. The download is provided through MakerWorld.

Is Ro-Flash NO AMS free to download?

Yes, Ro-Flash NO AMS is available as a free download through MakerWorld. Always check the license on the original platform to understand commercial use, remixing, and attribution requirements.

No ratings yet

No comments yet – be the first!

Similar Models

6 Suggestions

Feed Blog Slicer Cost Calculator Image Search Submit Kontakt Discord ☕ Buy me a coffee

DE EN FR ES IT NL