Robert Englund Hueforge

Project: RobertEnglund.hfpPrint at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 125.65x200mm in sizeYou may print at higher layer heights below the Min Depth of 0.48mmThe Max Depth is 2.2mm and the Actual Depth is 2.2mmFilaments Used:PLA PolyLite Black Transmission Distance: 0.3PLA BambuLab Basic Red Transmission Distance: 4PLA BambuLab Basic Orange Transmission Distance: 5PLA BambuLab Basic Yellow Transmission Distance: 6PLA BambuLab Basic Beige Transmission Distance: 8PLA PolyLite White Transmission Distance: 5This print uses 6 unique filamentsSwap Instructions:Start with BlackAt layer #7 (0.64mm) swap to RedAt layer #12 (1.04mm) swap to OrangeAt layer #15 (1.28mm) swap to YellowAt layer #16 (1.36mm) swap to BeigeAt layer #22 (1.84mm) swap to White for the rest.