Robocat lowrider Mk2

Ok, i didnt even build Mk1, i had a better idea.....Go lower.
So i put the esc's on the arms, and the electronics in the middle. Now the battery can be on the main plate where it should be.
I added a space underneath for power cables and a pdb. This is the "power deck". It has the original upper plate as the bottom plate, supporting "robopower.stl".
The power deck has spaces for a noise filter, and 2 bec's, one 5v for the fc, and one 8v, or 12v for video. I will use the 6.5mm spacers for this setup.
You could put a normal pdb in there if you like, just select the 4.5mm spacers, as most pdb's are 2mm thick.
Put 2 of the 8mm spacers at the back.
Now you have space in the center fo the flight controller, the VTX and the RX.
"Robofront2" fits a HS1177 camera. "Robofront3" fits a board camera. It has small walls to help keep the battery in place during a crash, "Roborear2" is really just for this purpose alone and has no other function.
Both the front and rear are fixed in place wi