Robocop Hueforge

Project: Robocop.hfp Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 179.09x235mm in size You may print at higher layer heights below the Min Depth of 0.48mm The Max Depth is 2.2mm and the Actual Depth is 2.2mm Filaments Used: PLA BambuLab Basic Black Transmission Distance: 0.6 PLA BambuLab Basic Jade White Transmission Distance: 5 PLA BambuLab Basic Red Transmission Distance: 4 PLA BambuLab Basic Yellow Transmission Distance: 5.5 This print uses 4 unique filaments Swap Instructions: Start with Black At layer #12 (1.04mm) swap to Jade White At layer #16 (1.36mm) swap to Red At layer #19 (1.6mm) swap to Yellow At layer #20 (1.68mm) swap to Black At layer #21 (1.76mm) swap to Jade White for the rest.