Thingiverse
RoboHeart Hercules Casing
0
Download
0
Likes
0
Makes
This is the casing for the popular RoboHeart Hercules DYI electronics board! The casing provides protection for your board and it looks very cool.
All 3D printables can be printed without support structures!
It provides openings for the important connectors, so the cables can be led out (for motors, external switch and USB-C).
Also it provides many smaller openings for cooling if your RoboHeart may become hot, these can also be used for smaller jumper cable if you have periphery attached to the RoboHeart.
You can order the RoboHeart here if you don't have it yet (only available in Germany for now): https://augmented-robotics.com/order/
The casing is comprised of 4 components which you can print at home. The 3D component names are self-explanatory. The spacer goes inside the casing, it is useful if you want to add periphery or a battery to your RoboHeart.
Additionally to the 3D print components you will need:
- 4 screws: M2.5 x 25 (we suggest DIN 912 with l =
All 3D printables can be printed without support structures!
It provides openings for the important connectors, so the cables can be led out (for motors, external switch and USB-C).
Also it provides many smaller openings for cooling if your RoboHeart may become hot, these can also be used for smaller jumper cable if you have periphery attached to the RoboHeart.
You can order the RoboHeart here if you don't have it yet (only available in Germany for now): https://augmented-robotics.com/order/
The casing is comprised of 4 components which you can print at home. The 3D component names are self-explanatory. The spacer goes inside the casing, it is useful if you want to add periphery or a battery to your RoboHeart.
Additionally to the 3D print components you will need:
- 4 screws: M2.5 x 25 (we suggest DIN 912 with l =
Hai stampato questo modello? Accedi e condividi il tuo make!
Accedi per lasciare un commento
AccediAncora nessun commento – sii il primo!
