Robot Tank Blower (YP100)

I made this kit to use my yp100 "robot tank" to blow leaves. It uses the following parts:

Xfly Galaxy 8 4s EDF https://www.amazon.com/gp/product/B096V6NX4J/
80A brushless esc (though 60A should work... draws ~40A full throttle on a fresh 4s)
4s5000 lipo battery
1/8" thick aluminum stock
Printed EDF mount
Printed EDF duct
Printed battery mounts

Assembly is straightforward, using all M3 hardware. The battery mounts are meant for a hardcase 4s5000, and fit existing holes on top of the yp100 frame (note photos were taken before I made the battery mounts... but the mounts are way better than a strap if they fit your pack). The aluminum beam on mine actually came from the old Y gantry of my A8 printer, lol. It's basically 1/8" 2" wide bar stock with some holes drilled in it to fit the EDF mount and the frame holes. Some craftsmanship/tools are required to make this part. The EDF mount is tilted down 5 degrees, which I found to be excellent for sweeping flat surfaces like drivewa