Slicer Discord
Rockband Drums – 3D-Druckmodell von MakerWorld MakerWorld
Music

Rockband Drums

41 Downloads
10 Likes
9 Makes
Zum Modell
Found a Rockband drum set that was missing the foot pedal and stand for a deal. The foot pedal is triggered by any non-latching momentary switch. I used a standard guitar pedal switch (https://www.amazon.com/Gebildet-Momentary-Switch-Normally-Footswitch/dp/B0BJ1JFBMM/ref=sxin_17_pa_sp_search_thematic_sspa) as it's made for heavy use. Soldered it to a 1/8" jack (https://www.amazon.com/dp/B00ZSX761U). I also used 1-3/8" (35mm) wooden dowels for the stand. The over-center leveler are held in place with M3 x 30mm Socket Head screws (https://www.amazon.com/iExcell-Stainless-Metric-Socket-Washers/dp/B0812TYT5L/ref=sr_1_3).
Kategorie
Music
Quelle
MakerWorld
Veröffentlicht
Aktualisiert
Was du zum Drucken brauchst: Mittel Niedrige Konfidenz
Einteilig Hardware nötig
Supports 1/3
Zusammenbau 0/3
Einstellungen 1/3
Druckbett 0/3
Nachbearbeitung 1/3
Drucker
FDM / FFF
Dateiformat
STL
Material
PLA, Wood PLA
Nachbearbeitung
Hardware
Software
Cura, PrusaSlicer o. Ä.
Noch keine Bewertungen
Noch keine Kommentare – sei der Erste!

Ähnliche Modelle

6 Vorschläge
Feed Blog Slicer Kostenrechner Bildersuche Einreichen Kontakt Discord ☕ Buy me a coffee
DE EN FR ES IT NL

Zur Sammlung hinzufügen