Thingiverse
Rocket lamp
di drzymala
463
Download
363
Likes
4
Makes
IMPORTANT NOTICE
- Please use max 5W lightbulbs (e.g. LED) or it might melt and cause fire.
- Do not use hot glue, use cyanoacrylates (a.k.a. super glue).
- First print the "tip.stl" file to see if your settings are right for the task.
You will need to adapt the "lamp_clamp.stl" model to match your lightbulb. The fins are glued to the chassis and the rest is held together by the exhaust screws. If the tip of the rocket won't turn out well, then print just the tip and glue it back atop.
- Please use max 5W lightbulbs (e.g. LED) or it might melt and cause fire.
- Do not use hot glue, use cyanoacrylates (a.k.a. super glue).
- First print the "tip.stl" file to see if your settings are right for the task.
You will need to adapt the "lamp_clamp.stl" model to match your lightbulb. The fins are glued to the chassis and the rest is held together by the exhaust screws. If the tip of the rocket won't turn out well, then print just the tip and glue it back atop.
Hai stampato questo modello? Accedi e condividi il tuo make!
Accedi per lasciare un commento
AccediAncora nessun commento – sii il primo!
