Rocket Launcher Exo Add-on

Rocket Launcher Exo Add-on for Mobile Exo-Suit create by jajaum3d ,90% Scale，no support机械手机支架火箭发射器扩展包，缩小了90% Print Suggestions and my configuration is already set upI suggest a minimum of 3 walls to ensure spring is printed solid.For the sake of the spring, print a little slower to mitigate the wobble. I print with Inner Walls at 40mm/s, and Outer Walls at 25mm/s.If at first the launcher jams up, this is normal. Simply pump the piston a few times to loosen things up until it fires true!发射器打印建议：我已经在我的配置中对弹簧进行了专门的设置，直接打印就好1.至少3层墙,不需要任何支撑。2.弹簧整体都是悬垂速度越慢越好。3.首次发射会有卡住的情况，是正常的，需要使劲按一下。<img src="https://makerworld.bblmw.com/m