Rocky Hueforge

Project: Rocky.hfp Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 168.82x240mm in size You may print at higher layer heights below the Min Depth of 0.48mm Filaments Used: PLA BambuLab Basic Black Transmission Distance: 0.6 PLA BambuLab Basic Blue Transmission Distance: 2.9 PLA BambuLab Basic Jade White Transmission Distance: 5 PLA BambuLab Basic Red Transmission Distance: 4 PLA BambuLab Basic Yellow Transmission Distance: 5.5 This print uses 5 unique filaments Swap Instructions: Start with Black At layer #8 (0.72mm) swap to Blue At layer #11 (0.96mm) swap to Jade White At layer #12 (1.04mm) swap to Red At layer #16 (1.36mm) swap to Yellow At layer #17 (1.44mm) swap to Jade White Border Only Colors from here until the end. At layer #28 (2.32mm) swap to Blue for the rest.