Thingiverse
RODE NT-USB-Mini Shockmount
door HelgeNeumann
5
Downloads
9
Likes
1
Makes
I was looking for a shock mount for my Rode NT USB Mini and couldn't find anything designed for the weird shape.
This design works like a charm and you can choose between a high and a standard height, depending on your hair tie/rubber band and whether you wanna screw the inner piece in or use the rubber thing for a pressure fit. The screw method works much better, tho but you should use the test pieces first to dial in your horizontal expansion.
I would suggest printing the hooks on the outer part with a much slower speed setting and supports are designed into the model. I printed the shock mount in Carbon Fiber PETG for the looks but PLA should work fine. The hair ties are standard 40 by 3mm.
If you found this Thing helpful, a small tip for an energy drink would be appreciated [PayPal](https://paypal.me/helgehelge123)
ProTip: Use a lighter to heat the hooks and bend them a little to act like a proper hook
This design works like a charm and you can choose between a high and a standard height, depending on your hair tie/rubber band and whether you wanna screw the inner piece in or use the rubber thing for a pressure fit. The screw method works much better, tho but you should use the test pieces first to dial in your horizontal expansion.
I would suggest printing the hooks on the outer part with a much slower speed setting and supports are designed into the model. I printed the shock mount in Carbon Fiber PETG for the looks but PLA should work fine. The hair ties are standard 40 by 3mm.
If you found this Thing helpful, a small tip for an energy drink would be appreciated [PayPal](https://paypal.me/helgehelge123)
ProTip: Use a lighter to heat the hooks and bend them a little to act like a proper hook
Heb je dit model geprint? Inloggen en deel je make!
Log in om een reactie achter te laten
InloggenNog geen reacties – wees de eerste!
