Thingiverse
Rogue Crown
por Givaneo_Arts
0
Descargas
2
Likes
0
Makes
This is the crown I designed and wore with my D&D rogue costume for Renaissance Faire.
It's a relatively fast print (mine took about 2 hours to print) with no supports needed.
> - Make sure you print the crown with the spikes facing upwards.
> This allows the crown to print flat on the buildplate with no supports.
The inner-diameter of the crown is 19cm (about 7.5in), so adjust the XY-axis scale accordingly to fit your head size.
I included a test ring ("Test_ring_for_crown.stl") so that you can experiment with various scales without wasting filament.
It's a relatively fast print (mine took about 2 hours to print) with no supports needed.
> - Make sure you print the crown with the spikes facing upwards.
> This allows the crown to print flat on the buildplate with no supports.
The inner-diameter of the crown is 19cm (about 7.5in), so adjust the XY-axis scale accordingly to fit your head size.
I included a test ring ("Test_ring_for_crown.stl") so that you can experiment with various scales without wasting filament.
¿Has impreso este modelo? Inicia sesión y comparte tu make.
Inicia sesión para dejar un comentario
Iniciar sesiónAún no hay comentarios – ¡sé el primero!
