Slicer Discord
Rolling Log Mousetrap – Modello 3D stampabile da Thingiverse Thingiverse

Rolling Log Mousetrap

di jabixby
15 Download
15 Likes
0 Makes
Vai al Modello
Yet another Rolling Log Moustrrap. There are lots of youtube videos out there to see how this works. This one uses a 3/8" rod (delrin, metal, wood, doesn't matter much) inside of a 1/2" pvc pipe (conduit pipe or sprinkler pipe). The bucket is a typical 5 gallon utility bucket such as the Home Depot bucket. The ramp for the mouse last walk is 1x2 wood, 3 feet long. It can be attached to the clip with screws from the bottom of the clip (#8 wood or 8-32 machine screws), or with a zip tie through the provided slot.

There are two versions of the clip in the files section. One has a boss with screw holes and a zip tie slot for attaching the ramp, which the other is just the clip with the hole for the axle. The clip just presses onto the bucket rim, no fasteners required.

There are holes in the clip for set screws, again #8, to secure the axle if that proves to be necessary (I found the press fit to be sufficient).

Home Depot Bucket: https://www.homedepot.com/p/The-Home-Depot-5-Gal-H
Fonte
Thingiverse
Cosa serve per stampare: Intermedio Bassa affidabilità
Pezzo unico Viteria richiesta
Supporti 1/3
Assemblaggio 0/3
Impostazioni 1/3
Dimensioni piano 0/3
Post-lavorazione 1/3
Stampante
FDM / FFF
Formato file
STL
Materiale
Wood PLA
Post-elaborazione
Viteria
Software
Cura, PrusaSlicer o simile
Ancora nessuna valutazione
Ancora nessun commento – sii il primo!
Feed Blog Slicer Calcolatore Ricerca per immagine Invia Contatto Discord ☕ Buy me a coffee
DE EN FR ES IT NL

Aggiungi alla collezione