Rolling Tracks Small Glasses Case

# Description

This is a case for small glasses. It was inspired by living hinge designs meant for laser-cut plywood. However, I wanted to experiment with arrays of 3D-printed print-in-place rigid hinges.

https://youtu.be/ut0pfMXIyXI

# Printing

STL files should be oriented correctly so that the proper side is on the print bed.

If printing the cross-section reference, the use of a brim is recommended.

Do not use brim or supports for the glasses case or mechanical test.

Tested to work with PLA and PETG.

When releasing from the bed, avoid applying too much to the living hinges used for the latches.

# Parts Required

* M2-4mm hex socket screws
* x2
* M2 hex nuts
* x2
* Chamois glasses cleaning cloth

# Tools required

* M2 hex socket driver (Allen wrench or compatible Torx wrench)
* Pliers
* Optional: I could usually press fit nuts with my fingers (phrasing?)

# Assembly

See the first part of the video for more details.

1. Break off