Rollkage Camera Mount for Toothpick quadcopters

This nano camera mount is designed for 25mm x 25mm toothpick type quadcopters and relies on the flexibility of TPU to create a 'rollcage' type shape to hold & protect the camera, hence I've called it the Rollkage.

There are 5 variants for different length 14mm wide nano FPV cameras, the length in question is between the axis of the mount point to the very front of the lens (see the illustration picture).

Here's a few length examples:
14mm - RunCam Nano HD
12mm - Foxeer DigiSight V2
11mm - RunCam Racer Nano
10mm - RunCam Nano 2

Requirements:
Toothpick type quadcopter with 25x25mm flight controller mount setup.
Mount bolts long enough to protude 8mm beyond the top board, too short and the camera mount won't hold well enough.
Two M2x4 bolts to hold the camera on the mount.

There's also an optional 0.6mm thick TPU protector plate to print to try and prevent the camera touching the board immediately underneath it in a very hard crash, it has cut-outs to allow airflow over