Thingiverse
Romulan warbird
by BonsaiBrain
901
Downloads
574
Likes
16
Makes
Inspired by the starship enterprise, posted as thing No. 8100 (http://www.thingiverse.com/thing:8100), I converted a google 3d galery model of a romulan warbird (http://sketchup.google.com/3dwarehouse/details?mid=c5b88c16e0091eed6208ceb8c2299bcc&prevstart=0) to a printable stl file.
Because of several overhangs, I had to cut the ship into pieces to get a printable version.
Now the ship consists of 4 parts: The left side, the right side and the 2 panels.
The size is about 100 mm x 70 mm x 2.5 mm.
The print was very good on my mendel with a layer thickness of 0.2 mm in glowing-in-the-dark PLA.
After cleaning (which is not very much work, if you set your retraction distance long enough) I glued it together.
The panels should klick into the wings - otherwise they also can be glued.
You can read more about this on: www.ifeelbeta.de
Live long and prosper!
BonsaiBrain
Because of several overhangs, I had to cut the ship into pieces to get a printable version.
Now the ship consists of 4 parts: The left side, the right side and the 2 panels.
The size is about 100 mm x 70 mm x 2.5 mm.
The print was very good on my mendel with a layer thickness of 0.2 mm in glowing-in-the-dark PLA.
After cleaning (which is not very much work, if you set your retraction distance long enough) I glued it together.
The panels should klick into the wings - otherwise they also can be glued.
You can read more about this on: www.ifeelbeta.de
Live long and prosper!
BonsaiBrain
Did you print this model? Sign in and share your make!
Sign in to leave a comment
Sign inNo comments yet – be the first!
