Roronoa Zoro Fire

Project: One PIece Roronoa ZoroPrint at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 226x226mm in sizeYou may print at higher layer heights below the Base Thickness of 0.96mmThe Max allowed Thickness is 3.68mm and the Actual Thickness is 3.68mmFilaments Used: #080a0d PLA BambuLab Black Transmission Distance: 0.3 #c12e1f PLA BambuLab Basic Red Transmission Distance: 3.6 #f4ee2a PLA BambuLab Basic Yellow Transmission Distance: 6.4 #e2dedb PLA BambuLab Jade White Transmission Distance: 5This print uses 4 unique filamentsSwap Instructions: Start with Black At layer #15 (1.28mm) swap to Red At layer #23 (1.92mm) swap to Yellow At layer #29 (2.4mm) swap to White for the rest. You can easily scale up or down using the scale option.Uncheck uniform scale and dont change the z option. No Prime Tower Needed, uncheck in support tab