Rose HueForge

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 200x200mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 2.2mm and the Actual Depth is 2.2mm

Filaments Used:
PLA PolyLite Black Transmission Distance: 0.3
PLA PolyLite Orange Transmission Distance: 7.5
PLA PolyLite Red Transmission Distance: 1.5
PLA PolyLite Lemon Yellow Transmission Distance: 6.5
PLA PolyLite White Transmission Distance: 5
This print uses 5 unique filaments

Swap Instructions:
Start with Black
At layer #10 (0.88mm) swap to Orange
At layer #14 (1.2mm) swap to Red
At layer #17 (1.44mm) swap to Lemon Yellow
At layer #21 (1.76mm) swap to White for the rest.