rose on a letter

My first attempt at Hueforge, so be nice :-) Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 112.97x150mm in sizeYou may print at higher layer heights below the Min Depth of 0.48mmThe Max Depth is 2.2mm and the Actual Depth is 2.2mm Filaments Used: PLA PolyTerra Black Transmission Distance: 0.3 PLA Generic red Transmission Distance: 5 PLA PolyTerra Cotton White Transmission Distance: 1.5This print uses 3 unique filaments Swap Instructions: Start with Black At layer #15 (1.28mm) swap to red At layer #22 (1.84mm) swap to Cotton White for the rest.