Roses Hueforge

If you would like to thank me or support me with a one-time donation, or if you are interested in selling physical prints of my models, check out: https://buymeacoffee.com/heyben Roses Hueforge Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 200x200mm in sizeYou may print at higher layer heights below the Min Depth of 1.1mmThe Max Depth is 3.8mm and the Actual Depth is 3.5mm Filaments Used: PLA BambuLab Basic Black Transmission Distance: 0.2 PLA PolyLite Blue Transmission Distance: 1.5 PLA PolyLite Aqua Blue Transmission Distance: 3.3 PLA BambuLab Basic Mistletoe Green Transmission Distance: 0.6 PLA BambuLab Basic Red Transmission Distance: 4 PLA BambuLab Basic Orange Transmission Distance: 5.2 PLA BambuLab Basic Jade White Transmission Distance: 5.8This print uses 7 unique filaments ***attached .3mf file prints the first 6 layers at 0.16mm then the rest at 0.08mm for faster print time******the layer numbers will be different but the layer hei