Thingiverse
Rostock Bed Design -DXF output
di kraczekj
10
Download
7
Likes
0
Makes
This is an OpenSCAD drawing of a Rostock Bed and Top written so that you can Export it as a DXF and send those parts to a laser printer or a plotter.
in the current configuration the distance from the smooth rods to the center of the print bed is 175mm, the standard Rostock Size.
there are holes for you to attach the Heated PCB MK1 and to connect the RAMPS 1.4
you can configure the location of the holes if you have a different PCB or different set of electronics.
the idea for this loosely came from http://www.thingiverse.com/thing:31593 by RustyPaint
in the current configuration the distance from the smooth rods to the center of the print bed is 175mm, the standard Rostock Size.
there are holes for you to attach the Heated PCB MK1 and to connect the RAMPS 1.4
you can configure the location of the holes if you have a different PCB or different set of electronics.
the idea for this loosely came from http://www.thingiverse.com/thing:31593 by RustyPaint
Hai stampato questo modello? Accedi e condividi il tuo make!
Accedi per lasciare un commento
AccediAncora nessun commento – sii il primo!
