Rotating Earth Lithophane

Large 220mm Lithophane on a base rotating at .6 RPM. The lithophane was generated at lithophanemaker.com and printed all white. I used a cheap set of watercolors to tint the ocean and land areas. The rotating base uses a small USB-powered, 59 RPM motor with a final gear ratio of 100:1. All stls are provided in the download section. The base consists of five printed parts and some additional parts that can be purchased from Maker's Supply. See links in the Bill of Materials section below for the parts I used. I used part KA004 White LED Strip, but you could also use part KA001 RGB Strip if you want different color light. Total cost of parts is about $20-$25 depending on which LED strip you choose. Additionally, you will need four M3x10mm and one M3x16mm machine screws. See my other spherical lithophanes Printing InstructionsMy profiles have all my preferred settings. Make sure to select your printer, plate and filament in Studio or the Handy App. If you prefer to plate them yourself