Rotating spool holder for A1 mini

Rotating spool holder for A1mini I was tired of constantly moving my a1 mini to put new spool on so I designed a top mounted rotating hracket that allows you to have the printer very close to the back wall so it takes as little space as possible, How to install: 1. Print the parts. remember to embed M6 nut in the base plate. Print profile has a pause in it to allow for that. I've used locking nut as this is what I had. Make sure to insert the nut with locking ring facing UP. 2. Remove the supports (push them out through the holes) and install the plungers 3. Remove top cap and top plate and hold on to the original screws. 4. Attach printed base plate to the printer using the 4 original screws. First insert 3 top screws, then the front screw. 5. Clean supports of the “turret” and the support arm 6. Attach support arm to the turret using BT3x12 self tapping screw or similar. Do not over tighten, we want this to spin freely to alighn with the filament path from the spool. 7. Remove the PT