MakerWorld
3D Printer Accessories
Go to Model
Rotating Swatch Storage (80 Slots)
4
Downloads
1
Likes
1
Makes
You can use this rotating swatch storage with any filament swatches in the format of 24x24x2mm like the ones from Bambulab.Of course I also created a fitting swatchNeeded hardware2* 51110 axial bearing (ID= 50mm, OD=70mm, H=14mm)6* M4 heatset inserts (Ruthex style)6* M4x25mm socket head screws (DIN 912 / ISO 4762)6* 20mm diameter, 5mm high rubber feet (I used clear ones as they don't stain your table top)PrintingSimply print all files with the orientation in the 3MF file.Only the base and the bearing clamp need supports.PreparationRemove supportsClean outside of bearings from oil/greaseGrind running slope of “Base” lightly to get a smooth surface for the swatches to run onInstall heatset inserts into "Top"AssemblyTake care of the bearing orientation! As you can see in the picture, the outer rings have a different internal diameter!Lay “Top” on the table (bottom side up) Mount first bearing Mount “Base” onto “Top”<figure class="image
Did you print this model? Sign in and share your make!
Sign in to leave a comment
Sign inNo comments yet – be the first!